Product Features:
1. An emergency tube light with a battery can run nonstop for 90 minutes when fully charged.
2. Beautiful architecture, excellent lighting, and a colour rendering score of 75.
3.High grade aluminium battery for heat dissipation, aluminium body and PC case.
4. Simple to setup
5. Remove the starting and ballast and replace CFLs with LED tubes.
6. The tube light can be immediately connected to AC110V or AC220V.
Product Specific
| Model Number | Bw-T8-1200mm-18w |
| Length | 1200mm (4ft) |
| Watts | 18w |
| LED chip | Epistar SMD2835/5730 |
| CRI | >83 |
| Lumens Efficiency | 160lm/w |
| Power Factor | PF>0.95 |
| Color Temperature | 2700k-6500k |
| Beam Angle | 120° 180° 330° |
| IP Grade | IP67 |
Detailed Images:
Step 1: Shut power "off" at circuit breaker to ensure all wiring involved in retrofitting the fixture is completely and do-energized.
Step 2: Remove diffuser/reflector cover on fixture (if applicable)o expose tube lamps and remove interior cover to expose ballast(s) and wiring.
Step 3:Bypass, or remove starter/ballast from fixture. Disconnect all wire leads between starter/ballast and lamp sockets in the fixture.
Step 4: Dispose of starter/ballast and fluorescent lamp(s) according to federal, state and local hazardous waste regulations.
Step 5: Connect AC line power wires (L) and (N) inside the fixture housing directly to lampe socket at both side.
Step 6: Replace interior wire cover on fixture insuring that wires are reliably secured inside the splice compartment.
Step 7: Insert Retrofit T8 tube(s) into lamp socket(s) with LED's facing away from the fixture base. Step 8: Replace fixture's diffuser/reflector (as applicable). Return power to system to light up lamps.
Usage:
FAQ:
1.What is the MOQ?
The Minimum is two pieces.
2.How long will it take to complete the samples? What about the widespread production?
Typically, producing samples takes 3-5 days. The quantity will determine the mass manufacturing lead time.
3.If we hold our own market place, can we still receive support?
Please provide us with a thorough description of the market's needs, and we'll talk about it and make helpful suggestions so we can help you find the best answer.
4.If you run a selling or manufacturing business?
We are a reputable manufacturer of LED lights, and our major products are LED solar lights, LED outdoor lights, and LED indoor lights.
